The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> Circuit Simulators >> how to simulate using spectre with standard cell
https://designers-guide.org/forum/YaBB.pl?num=1253965295

Message started by mydreamhouse on Sep 26^th, 2009, 4:41am

Title: how to simulate using spectre with standard cell
Post by mydreamhouse on Sep 26^th, 2009, 4:41am

standard cell provide spice netlist , symbol, blank schematic named cmos_sch, how to simulate in ADE?

Title: Re: how to simulate using spectre with standard cell
Post by Riad KACED on Sep 28^th, 2009, 1:20pm

Hi,

Given a blank schematic, I hope your foundry is providing you with a Spectre View for your standar cells ! the 'spectre' view is in the stop list by default. Provided you have a spectre view for say your 'inv', the spice netlist should include a subckt called 'inv' that defines your inverter with a nmos/pmos whose model names have to be defined in one of your model cards as well !

Cheers,
Riad.