The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> RC netlist simulation https://designers-guide.org/forum/YaBB.pl?num=1254220939 Message started by Evgenii on Sep 29th, 2009, 3:42am |
Title: RC netlist simulation Post by Evgenii on Sep 29th, 2009, 3:42am Hi guys! I simulate RC-netlist (from Calibre) with spectre. I have several files, say, inv.scs, inv.pxi, inv.pex. pxi and pex have references to .scs - my test bench file. In Result browser i see some problem: dubbed net names (same name in up and down register) I try to make all pins global (in subcircuit description ), but what to me do with internal net names? May be some spectre keyword are exist? Thanks! :D |
Title: Re: RC netlist simulation Post by Evgenii on Oct 5th, 2009, 6:29am I'm sorry for my english, but i solved this problem: default files names contains too match points: *.pxi.scs, *.pex.scs. * - name of file In this case, different netlists is not included in one circuit. Nets name was dubbed and some nets was floating... |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |