The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> AMS Simulators >> Abt tools required in cadence for mixed signal design. https://designers-guide.org/forum/YaBB.pl?num=1254311692 Message started by VINAY RAO on Sep 30th, 2009, 4:54am |
Title: Abt tools required in cadence for mixed signal design. Post by VINAY RAO on Sep 30th, 2009, 4:54am Hi, We have got IC5141,soc,assura,and IUS6.1(CADENCE).I am not started mixed signal design yet ,but i want to start it soon and i am yet to install IUS. I want to know what more tools are required for full mixed signal design flow???..Pl reply soon. Thank you, Regards, VINAY RAO. |
Title: Re: Abt tools required in cadence for mixed signal design. Post by Riad KACED on Oct 1st, 2009, 5:05am Hi Vinay, I hope I'm replying within your expected times ... ;) To run AMS Designer in the Virtuoso use model, i.e through DFII, then you ONLY need the IC and IUS streams. You do not need soc, assura, mmsim ... etc, ONLY IC and IUS. I would advise the last ISRs of IC5141 and IUS82 for your case, leave that very old IUS62. IUS82 has got many new features especially for wreal modeling. Also, I would advise using AMS Designer in ADE mode (not HED) with OSS based netliting. Cheers, Riad. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |