The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design Languages >> Verilog-AMS >> VerilogA code of NRZI Encoder https://designers-guide.org/forum/YaBB.pl?num=1258009260 Message started by somisetty on Nov 11th, 2009, 11:00pm |
Title: VerilogA code of NRZI Encoder Post by somisetty on Nov 11th, 2009, 11:00pm Hi all, The whole block diagram is USB transceiver is given below. I want to model only Encoder using verilogA code. Please provide proper code. And also NRZI code example has given below as, if '1' bit comes then transistion will happen, otherwise if '0' bit comes no transistion simply it follws the previous data. Thank you inadvance |
Title: Re: VerilogA code of NRZI Encoder Post by Riad KACED on Nov 12th, 2009, 2:48pm http://www.designers-guide.org/Books/dg-vams/index.html |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |