The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Modeling >> Semiconductor Devices >> Information about Epitaxial layer
https://designers-guide.org/forum/YaBB.pl?num=1258073609

Message started by DoYouLinux on Nov 12^th, 2009, 4:53pm

Title: Information about Epitaxial layer
Post by DoYouLinux on Nov 12^th, 2009, 4:53pm

Hi all,

I am designing an inductor on chip. In modeling the substrate, I need to know the information about the epitaxial layer. Here are my questions:

1) What is this epitaxial layer for ?

2) Normally, is the relative permittivity of the epitaxial layer equal to that of the silicon, e.g. 11.9 ?

Thanks a lot guyssss, ;)

DYL

Title: Re: Information about Epitaxial layer
Post by Riad KACED on Nov 15^th, 2009, 10:33am

Hi,

The answer to your question is pretty much in all the descent IC books.
In summary, The epitaxial layer is thin lightly doped layer that is deposited on top of the usually heavily doped wafer. The devices are actually formed in that epi layer. The epitaxial process has been primarily designed for bipolar isolation and it provides a better latch up performance as well. You can read more stories on the Internet I suppose.

This is a Snippet from the Nano-CMOS circuit and physical design By Ban P. Wong:

http://books.google.co.uk/books?id=MlAlzr_2K8MC&lpg=PP1&dq=nano%20cmos%20circuit%20and%20physical%20design&pg=PT180#v=onepage&q=&f=false

Well, I do not know the answer for the second question as it is related to the process technology you are using. You better ask the foundry guys for this.

Cheers,
Riad.

Title: Re: Information about Epitaxial layer
Post by aLittleKnowledge on Jul 13^th, 2010, 4:15am

"is the relative permittivity of the epitaxial layer equal to that of the silicon"
Yes. The relative permittivity silicon is largely unaffected by normal doping, even at the relatively heavy doping levels used in the substrate. We don't normally bother modifying the value even in the emitter-base junctions of bipolar transistors.

Title: Re: Information about Epitaxial layer
Post by vf80me on Jan 31^st, 2011, 6:58pm

Also make sure to properly model the resistance of the epi layer

depending on its resistivity versus the resistivity of the substrate you may observe different Q values, particularly at frequencies beyond peak Q