The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> System Simulators >> create finite delay of PFD in simulink https://designers-guide.org/forum/YaBB.pl?num=1260932229 Message started by casual on Dec 15th, 2009, 6:57pm |
Title: create finite delay of PFD in simulink Post by casual on Dec 15th, 2009, 6:57pm I try to model finite delay (nonideality) of PFD in simulink. I use the delay transport element. But it gives me weird output waveform because it ramping up and dn (poor slew rate) instead of giving me delay that I set (I set to 20% of the period). The input of the delay transport is a ideal squarewave pulses. Hope someone can advise me. |
Title: Re: create finite delay of PFD in simulink Post by chip on Mar 2nd, 2010, 9:08pm I think that cppsim is a better choice for simulation so in detail, cppsim is especial convenient for PLL simulation because it contains lots of example blocks. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |