The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Other CAD Tools >> Physical Verification, Extraction and Analysis >> solder bump..layout
https://designers-guide.org/forum/YaBB.pl?num=1263269708

Message started by somisetty on Jan 11^th, 2010, 8:15pm

Title: solder bump..layout
Post by somisetty on Jan 11^th, 2010, 8:15pm

hi all,

how to make a solder bump..layout?

Thanks a lot...

Title: Re: solder bump..layout
Post by Andrew Beckett on Jan 16^th, 2010, 9:48am

See http://www.designers-guide.org/Forum/guidelines.html.

Your question is very vague and non-specific, and as such is very unlikely to get an answer, at least not one that will be useful to you, because we have little idea what the real problem is.

Regards,

Andrew.