The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Design Languages >> Verilog-AMS >> oscillator verilog A file code
https://designers-guide.org/forum/YaBB.pl?num=1267177237

Message started by davidhongkong on Feb 26^th, 2010, 1:40am

Title: oscillator verilog A file code
Post by davidhongkong on Feb 26^th, 2010, 1:40am

Hi Anyone,
I am using verilog to do the rf wlan 802.11 g architecture behavior simulation in system level. So far I have difficult time to find a verilog A oscillator code. What I have is osc in ahdl format. So the simulation is not excecutable under verilog enviroment. I am wondering if anyone to help me. Million thanks

Title: Re: oscillator verilog A file code
Post by Andrew Beckett on Feb 26^th, 2010, 5:30am

Did you look at the "Verilog-AMS" link at the top of the page?

Note that Verilog A won't simulate in a Verilog (digital) simulator - you need to use either an analog simulator (such as Cadence's spectre), or a mixed signal simulator (such as Cadence's AMS Designer).

Also, in Cadence's IC tools, you should have libraries (such as ahdlLib, rfLib) which have both SpectreHDL ("ahdl" - no longer supported in spectre) and VerilogA views.

http://www.designers-guide.org/VerilogAMS/

Regards,

Andrew.