The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design >> Analog Design >> designing a Voltage Controlled Oscillator (VCO) https://designers-guide.org/forum/YaBB.pl?num=1268223730 Message started by mustakhim on Mar 10th, 2010, 4:22am |
Title: designing a Voltage Controlled Oscillator (VCO) Post by mustakhim on Mar 10th, 2010, 4:22am hye guys, I'm looking to design a Voltage Controlled Oscillator (VCO) that meets the below requirements : -output voltage should be periodic but doesnt matter what shape -should adjust its frequency in response to input voltage which is 1V-2V. -input impedance should be more than 10k ohm and output impedance should be less than 1k ohm -1V produce frequency FL and 2V produce frequency FH Can anybody give me where is the good place to start? Thanks in advance for any help. |
Title: Re: designing a Voltage Controlled Oscillator (VCO) Post by loose-electron on Mar 10th, 2010, 4:38pm min-max frequency? phase/jitter requirements? CMOS? Bipolar? 5um or 28nm? more info needed/ |
Title: Re: designing a Voltage Controlled Oscillator (VCO) Post by mustakhim on Mar 12th, 2010, 9:30pm loose-electron wrote on Mar 10th, 2010, 4:38pm:
the min and max frequency is not given yet, its given later during the lab. The method of doing it is indipendent, and theres restriction in designing it as long as it meets the requirement. thanks |
Title: Re: designing a Voltage Controlled Oscillator (VCO) Post by loose-electron on Mar 14th, 2010, 12:01pm um, how do I put this nicely? Why are you coming here to have this forum do your school homework? Read the instructor provided materiel and study up on the subject. |
Title: Re: designing a Voltage Controlled Oscillator (VCO) Post by mustakhim on Mar 14th, 2010, 3:39pm loose-electron wrote on Mar 14th, 2010, 12:01pm:
sorry about that, but i just want a rough idea on designing the circuit. The lab exercise is to design the circuit, without giving any additional information rather than the requirements stated above. I post it in this forum just to get some rough idea on how to design the circuit that meets the requirements given. I hope you guys can help me as i'm still learning about electronics. Thanks |
Title: Re: designing a Voltage Controlled Oscillator (VCO) Post by tkhan on Mar 14th, 2010, 5:50pm http://www.designers-guide.org/Books/ |
Title: Re: designing a Voltage Controlled Oscillator (VCO) Post by loose-electron on Mar 15th, 2010, 2:57pm some constructive suggestions --- Google the topic and see whats out there. (duh!) Start looking into textbooks. If the design is board level look at whats out there for available components. Go see: http://search.digikey.com/scripts/DkSearch/dksus.dll?WT.z_homepage_link=hp_ProductIndex&lang=en&site=US&keywords= and search there for suitable parts. |
Title: Re: designing a Voltage Controlled Oscillator (VCO) Post by oermens on Mar 16th, 2010, 6:11am You can also find video lectures by Ali Niknejad (UC Berkeley) here: http://webcast.berkeley.edu/course_details.php?seriesid=1906978242 |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |