The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design >> Mixed-Signal Design >> PCB Design Company https://designers-guide.org/forum/YaBB.pl?num=1268853637 Message started by bhavuli on Mar 17th, 2010, 12:20pm |
Title: PCB Design Company Post by bhavuli on Mar 17th, 2010, 12:20pm Hi Folks, I have a few packaged chips that I would like to interconnect on a PCB. The system is designed for 10 Gb/s. I was wondering if any of you would happen to know a company that specializes in integrating these components on a single PCB at the targeted frequency/bit rate? Thank you for you time! Best regards, Bhavin |
Title: Re: PCB Design Company Post by loose-electron on Mar 17th, 2010, 4:11pm lots of place do. Where are you located? |
Title: Re: PCB Design Company Post by bhavuli on Mar 18th, 2010, 7:24am Hi loose-electron, I am located in Montreal, Canada. Thanks, Bhavuli |
Title: Re: PCB Design Company Post by loose-electron on Mar 19th, 2010, 9:34am OK, contact Ken Martin at the University of Toronto - He probably can direct you to someone - Yes Toronto is not close by but its the best I can suggest. Other options - Do a search for mixed signal designers local to you, or push come to shove down in the Boston area. There is probably someone near to Montreal, but thats what I can offer bon chance! jerry |
Title: Re: PCB Design Company Post by bhavuli on Mar 19th, 2010, 9:45am Merci beacoup loose-electron! Best regards, Bhavuli |
Title: Re: PCB Design Company Post by loose-electron on Mar 22nd, 2010, 2:46pm ce n'est pas une probleme bonne chance avec cette (god my french is getting rusty!) :D |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |