The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> Circuit Simulators >> Control language for "Custom WaveView" of Synopsys
https://designers-guide.org/forum/YaBB.pl?num=1272477082

Message started by pancho_hideboo on Apr 28^th, 2010, 10:51am

Title: Control language for "Custom WaveView" of Synopsys
Post by pancho_hideboo on Apr 28^th, 2010, 10:51am

Recently I can have "Custom WaveView" of Synopsys.
http://www.synopsys.com/Tools/Verification/AMSVerification/DesignAnalysis/Pages/CustomWaveView.aspx
http://www.designers-guide.org/Forum/YaBB.pl?num=1231424371/1#1

As you know, this waveform viewer supports many formats such as Cadence PSF, Agilent ds, Synopsys tr0 and Novas FSDB, etc.

Here I have question.
Is there any control language provided for plotting data in this "Custom WaveView" ?

Title: Re: Control language for "Custom WaveView" of Synopsys
Post by bernd on Apr 29^th, 2010, 2:00am

If you have an Synopsys SolveNet account,
have a look here:
https://solvnet.synopsys.com/dow_retrieve/D-2010.03/cxwv/pdf/ACErm.pdf

*

Title: Re: Control language for "Custom WaveView" of Synopsys
Post by pancho_hideboo on Jun 19^th, 2010, 10:23am

Self follow up. :D

We can use ACE(Analysis Command Environment) for this purpose.
I can use Synopsys Custom WaveView as Unified Post Processing Environment for many vendor's simulator outputs.

Analysis Command Environment (ACE) is a Tcl-based programming environment comprised of a set of high-level waveform data operating commands evolved from the old Synopsys APX (Application Programming Extension) API functions.
ACE can be executed in both GUI mode and non-GUI batch mode.