The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> AMS Simulators >> HELP! verilog-ams simulation
https://designers-guide.org/forum/YaBB.pl?num=1274857373

Message started by minnie on May 26^th, 2010, 12:02am

Title: HELP! verilog-ams simulation
Post by minnie on May 26^th, 2010, 12:02am

hello, i have a simple problem with pll simulation with verilog-ams.

i'd like to use ic5141 to simulate,please tell me wether it works, for i used to see some people said i need to a tool named "ius".

what else , i download the model of pll of the website, there are a few files in it , with different file stye. How can i use it in ic5141?

thx very much

minnie

Title: Re: HELP! verilog-ams simulation
Post by sheldon on May 26^th, 2010, 5:19am

Minnie,

AMS Designer is the Cadence simulator for mixed-signal simulation,
simulating with Verilog-AMS. AMS Designer is included in the digital
simulator release stream, IUS. So you will need to include IUS in
your path.

To use AMS Designer, you need to select the simulator in ADE,
Setup --> Simulator/Directory/Host --> ams. You will need to setup
to run the simulation correctly, you may wish to contact your local
support for help.

In addition, to the models on the Designer's Guide, there are some
useful models contained in bmslib in the samples directory.

Best Regards,

Sheldon