The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> AMS Simulators >> Inherited supply connections do not work in AMS? https://designers-guide.org/forum/YaBB.pl?num=1275772858 Message started by thechopper on Jun 5th, 2010, 2:20pm |
Title: Inherited supply connections do not work in AMS? Post by thechopper on Jun 5th, 2010, 2:20pm Hi all, After running a long simulation where a digital sub-block using inheritance supply connectors for the internal global supply nets VPOS! and VNEG! I realized the supply voltages did not got actually connected to that block. I had to tweak my bench and by hardwiring both VPOS! and VNEG! to the actual supply lines pins coming into the block one hierarchy level up. Is this a known bug or did I do something wrong? Any feedback is appreciated. Thanks Tosei |
Title: Re: Inherited supply connections do not work in AMS? Post by ywguo on Jun 6th, 2010, 8:44pm Hi Tosei, I did use inheritance connection when I simulated using ams simulator. It worked fine. Did you set up the connection rule correctly? What's connection rule do you use? Please select an inherited connection rule. Best Regards, Yawei |
Title: Re: Inherited supply connections do not work in AMS? Post by ywguo on Aug 25th, 2010, 10:36pm Hi Tosei, Have you resolve that problem? I encounter similar problem. My software version is IC.6.1.4.500.6. Yawei |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |