The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> Circuit Simulators >> transient analysis stops at 10u
https://designers-guide.org/forum/YaBB.pl?num=1279238799

Message started by sharkies on Jul 15^th, 2010, 5:06pm

Title: transient analysis stops at 10u
Post by sharkies on Jul 15^th, 2010, 5:06pm

Hi.. I'm running a transient analysis while strobing.
The problem is, when I run for 25us, I only get 10us of data when I plot
What's happening here? When I turn off the strobing, it seems to give me 25us.. I'm left in the dark here

Title: Re: transient analysis stops at 10u
Post by boe on Jul 16^th, 2010, 6:11am

sharkies,
please provide more information (cf. Forum guidelines http://www.designers-guide.org/Forum/guidelines.html).

BOE

Title: Re: transient analysis stops at 10u
Post by oermens on Jul 16^th, 2010, 10:17am

Perhaps you've hit the 2GB result file limit in IC5141 (I'm assuming you're using Cadence tools)? Refer here:

http://www.designers-guide.org/Forum/YaBB.pl?num=1278069552/2#2