The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Modeling >> Behavioral Models >> Model for offset of latch https://designers-guide.org/forum/YaBB.pl?num=1279718261 Message started by Parveen on Jul 21st, 2010, 6:17am |
Title: Model for offset of latch Post by Parveen on Jul 21st, 2010, 6:17am Is there any equivalent model for latch along with its offset???? Or rather, how can we model the offset of a latch???? |
Title: Re: Model for offset of latch Post by AnalogDE on Jul 21st, 2010, 4:12pm To model the offset, place a voltage source with value set to the offset in series with the input. |
Title: Re: Model for offset of latch Post by raja.cedt on Jul 23rd, 2010, 1:56am i guess you are asking abut how to estimate rather how to put simulation...as first order approximation you can use pilgrim coefficients based models. are you locking for this or any thing else? Thanks, Rajasekhar. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |