The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> Circuit Simulators >> Monte Carlo/ MMSIM7/ IBM 8hp
https://designers-guide.org/forum/YaBB.pl?num=1281730904

Message started by Lu on Aug 13^th, 2010, 1:21pm

Title: Monte Carlo/ MMSIM7/ IBM 8hp
Post by Lu on Aug 13^th, 2010, 1:21pm

I am doing Monte Carlo simulation (Process) using Spectre 7.1 in IBM 8hp 130nm, but the results showed broad variation. How can I find out which of the process parameters are responsible for this or how can I run Monte Carlo simulation by only varying one of the process parameters.

Title: Re: Monte Carlo/ MMSIM7/ IBM 8hp
Post by Geoffrey_Coram on Aug 16^th, 2010, 5:56am

Do you have access to the model library (in an unencrypted format)? If so, you might be able to go in and modify the statistical distributions.

Have you looked through the output of "spectre -help montecarlo" ?