The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Design >> RF Design >> Switched Capacitor in Cadence
https://designers-guide.org/forum/YaBB.pl?num=1283148776

Message started by Rahul_K on Aug 29^th, 2010, 11:12pm

Title: Switched Capacitor in Cadence
Post by Rahul_K on Aug 29^th, 2010, 11:12pm

Where can I get the Switched Capacitor in the library of Cadence.
Tool: Cadence Custom IC Design
Front to back design Environment

Title: Re: Switched Capacitor in Cadence
Post by Rahul_K on Aug 30^th, 2010, 1:28am

Also, in the tool Cadence Virtuoso ADE, where can I get Switched Capacitor in the UMC_ library.

Title: Re: Switched Capacitor in Cadence
Post by raja.cedt on Aug 30^th, 2010, 1:37am

you make by using switches and a capacitor

Title: Re: Switched Capacitor in Cadence
Post by sheldon on Aug 30^th, 2010, 4:59am

Rahul,

1) This is not an RF design issue
2) You need to ask the foundry for a PDK
A PDK contains significant amounts of proprietary information
that foundries protect
3) You have not provided much information about what you are
trying to do.
if you are just interested in evaluating architectures at the
behavioral level, then you can use the switch [sw_no], etc.
in bmslib found with the other sample libraries
if you want to perform more physical simulations, you can get the
generic PDK from Cadence, pdk.cadence.com
Again, if you need a foundry PDK, please ask the foundry and in
the future, please address your questions to the appropriate topic

Best Regards,

Sheldon