The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> Basic RF circuit hspice simulation https://designers-guide.org/forum/YaBB.pl?num=1285541812 Message started by kanu on Sep 26th, 2010, 3:56pm |
Title: Basic RF circuit hspice simulation Post by kanu on Sep 26th, 2010, 3:56pm Hi All, I am new to RF circuit design. I have a basic doubt here. I am trying to simulate an inductor model in hspice. Now what should I be keeping the voltage source as ? Should I be taking sin source for simulation ? If it is a sin source, what should be its frequency ? Should I calculate resonant frequency by hand and specify that as sin source's frequency ? I will appreciate if someone can solve my doubts. Regards, Kanu |
Title: Re: Basic RF circuit hspice simulation Post by Geoffrey_Coram on Sep 27th, 2010, 6:00am What about the inductor are you trying to simulate? Q? S-parameters? Transient response? |
Title: Re: Basic RF circuit hspice simulation Post by kanu on Sep 27th, 2010, 8:02am I have modeled a spiral inductor according and have its equivalent circuit in terms of Rs, L, Reddy, Cp and Cox. I was trying to simulate this circuit to find its effective impedance. I thought AC simulation, sweeped over the frequency, should be enough. Only I have to take care of measuring the impedance at required frequency. Please let me know if my simulation method is right. Thanks, Kanu |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |