The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> Circuit Simulators >> How to get data of stb analysis in calculator?
https://designers-guide.org/forum/YaBB.pl?num=1291368549

Message started by ywguo on Dec 3^rd, 2010, 1:29am

Title: How to get data of stb analysis in calculator?
Post by ywguo on Dec 3^rd, 2010, 1:29am

Hi Guys,

How do I get the data of stb analysis in calculator. I want to measure the phaseMargin, gainMargin using the functions in calculator. Since I have to run a lot of corners, obviously it is not an efficient way to record stability summary in Direct Plot --> Main Form --> stb form.

Thanks
Yawei

Title: Re: How to get data of stb analysis in calculator?
Post by sheldon on Dec 3^rd, 2010, 2:18am

Yawei,

From the Results Browser, RMB click on the parameter you want: gain
margin, phase margin, ... and send it to the Calculator. Once it is in the
Calculator you can save it to an output.

Best Regards,

Sheldon

Title: Re: How to get data of stb analysis in calculator?
Post by Frank Wiedmann on Dec 3^rd, 2010, 3:51am

Another possibility is to select the "Add To Outputs" button in the Direct Plot form. You can then look up the corresponding expressions in ADE with Setup -> Outputs and manually copy them to the calculator.

Title: Re: How to get data of stb analysis in calculator?
Post by ywguo on Dec 4^th, 2010, 3:44am

Hi Sheldon and Frank, I got it. Thank you.