The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design Languages >> Verilog-AMS >> AC models https://designers-guide.org/forum/YaBB.pl?num=1292345605 Message started by Richardsim on Dec 14th, 2010, 8:53am |
Title: AC models Post by Richardsim on Dec 14th, 2010, 8:53am I have managed to run both Transient and AC simulations using Verilog-AMS models in Cadence. This was achieved using time domain (differential equation based) models. I would however like to implement models in the s-domain. I am struggling to find any information on this (both in The Designer's Guide to Verilog-AMS and on the web). I know that the user can define standard filter types, but cannot find the definition of your own models. Is this possible and if yes, where do I find some information? |
Title: Re: AC models Post by Ken Kundert on Dec 14th, 2010, 11:35am Search for laplace in the LRM: http://www.designers-guide.org/VerilogAMS/vams231.pdf -Ken |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |