The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> how to load assert statements from ADE https://designers-guide.org/forum/YaBB.pl?num=1294248103 Message started by cristiano.azzolini on Jan 5th, 2011, 9:21am |
Title: how to load assert statements from ADE Post by cristiano.azzolini on Jan 5th, 2011, 9:21am Hi all, I find the Assert statements for Spectre language very useful for many run-time verification on the devices. The only problem is that... how can I automatically add all my statement in the sim netlist generated by ADE ? I tried to create a separate file and include that from the Model window but the assertions should be inserted in the netlist footer, not on top. Any idea is appreciated! Thanks, Cristiano |
Title: Re: how to load assert statements from ADE Post by Andrew Beckett on Jan 5th, 2011, 1:18pm Hi Christiano, Why do the assert statements need to be included at the bottom? There should be no problem with including them at the top - spectre shouldn't care. So doing it via the model libraries form should be fine. Many customers have them as part of their model definitions, so I see no reason why this shouldn't work. There's also the Device Check UI, but to be honest that's more for design-specific assertions (and actually I find it easier to write the spectre syntax than use the form for things like this). Best Regards, Andrew. |
Title: Re: how to load assert statements from ADE Post by cristiano.azzolini on Jan 6th, 2011, 11:34pm Hi Andrew, you are right, adding the assert file as a model is ok but I forgot to use a .scs extension in the filename so that I received some errors due to sintax misinterpretation. Now it works correctly. Thanks, Cristiano |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |