The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> Spectre search option https://designers-guide.org/forum/YaBB.pl?num=1296901597 Message started by haykp on Feb 5th, 2011, 2:26am |
Title: Spectre search option Post by haykp on Feb 5th, 2011, 2:26am Dear Forum, Please let me know if Cadence Spectre simulator has search option, like that have HSPICE simulator: .option search " Path where to search the file" Thanks, Hayk |
Title: Re: Spectre search option Post by haykp on Feb 5th, 2011, 3:52am Many thanks for the info! To be honest I don't have spectre available on my side. I am just writting the script which will work on both HSPCIE and Spectre simultors. It would be very helpful for me if you can expand more on -I option of spectre. Please let me know the exact syntax of it. Thanks in advance. |
Title: Re: Spectre search option Post by haykp on Feb 5th, 2011, 4:20am Thank you very much!! This is what I exactly needed! Actually I have the hspice simulator, but dont have spectre. Just the last confirmation. So for spectre I can use > spectre -I < Input Path1> -I < Input Path2> ... -I < Input PathN> <Netlist>.scs Or cant I just write > spectre -I < Input Path1> < Input Path2> ... < Input PathN> <Netlist>.scs -- without -I for each new included path. |
Title: Re: Spectre search option Post by haykp on Feb 5th, 2011, 4:30am Thanks again for the help! |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |