The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> RF Simulators >> flicker noise in T/H circuit https://designers-guide.org/forum/YaBB.pl?num=1298265426 Message started by webbubm on Feb 20th, 2011, 9:17pm |
Title: flicker noise in T/H circuit Post by webbubm on Feb 20th, 2011, 9:17pm hi all, I have seen the document ''Simulation SC filters with SpectreRF'' from The Designer's Fuide Community . From the section 2.2 ,the noise in T/H circuit said is like formula (16), and my question is that is there the contribution of the flicker noise in T/H ? And from SpectreRF simulation is almost equal to formula (16).> Because I think there is flicker noise in T/H , I confused about that. In spectreRF it doesn't consider the flicker noise? But the spectreRF document said that the flicker noise is in the simulation . I miss something in it ? thanks ~ |
Title: Re: flicker noise in T/H circuit Post by Berti on Feb 21st, 2011, 5:19am Hi, Assuming the very simple T/H circuit of Figure 1, the flicker noise from the switch is negligible because there is no DC current through the switch. Cheers |
Title: Re: flicker noise in T/H circuit Post by webbubm on Feb 21st, 2011, 7:29pm thanks~ |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |