The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design >> RF Design >> LNA at Ku band https://designers-guide.org/forum/YaBB.pl?num=1299522327 Message started by jayce3390 on Mar 7th, 2011, 10:25am |
Title: LNA at Ku band Post by jayce3390 on Mar 7th, 2011, 10:25am Hi all, I need to design a LNA in the Ku frequency band (close to 14 GHz). I would like to use discrete packaged pHEMT transistor which could be mounted with PCBs. My question is : If I make the choice to go with non MMIC process, what is the best laminate I should use to design my hybrid LNA? :) |
Title: Re: LNA at Ku band Post by rfcooltools.com on Apr 1st, 2011, 12:32pm jayce3390, The most common laminate is probably a two layer Rogers 4003c. Which is used in almost almost all satellite TV LNB's. Its cheap and thermally stable. http://rfcooltools.com |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |