The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> HSPICE .net & .lin https://designers-guide.org/forum/YaBB.pl?num=1312960066 Message started by newic on Aug 10th, 2011, 12:07am |
Title: HSPICE .net & .lin Post by newic on Aug 10th, 2011, 12:07am For the Sparameter analysis, user can use .net & .lin analysis. What are the differences between them? |
Title: Re: HSPICE .net & .lin Post by spiceoracle on Nov 2nd, 2011, 9:24am The .NET analysis is the original HSPICE network analysis command. .NET is limited to 1 or two terminal networks and cannot output a S-parameter file such as a Touchstone formatted file. The .LIN analysis is the newer network analysis. .LIN is much more flexible and easier to use than .NET analysis. The .LIN analysis can extract network parameters for networks with large numbers of terminals. S-parameters files in Touchstone format can be output for use in other simulations. |
Title: Re: HSPICE .net & .lin Post by newic on Nov 2nd, 2011, 5:21pm thank you :) |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |