The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> AMS Simulators >> AMS-ADE multiple sdf command files https://designers-guide.org/forum/YaBB.pl?num=1316506841 Message started by Kamal on Sep 20th, 2011, 1:20am |
Title: AMS-ADE multiple sdf command files Post by Kamal on Sep 20th, 2011, 1:20am Hi All, I am running mixed-signal simulation and in my design I have 3 digital blocks. For each digital block I have a .sdf file, a .sdf.X file & a .cmd file. In AMS-ADE=>Simulation=>Options=>Compiler=>Use sdf command file I can put the sdf command file for one digital block. How can I proceed to select the 3 sdf command files during the simulation? |
Title: Re: AMS-ADE multiple sdf command files Post by boe on Sep 20th, 2011, 3:12am Kamal, An SDF command file can consist of several sections to annotate different portions of your design. See documantation. B O E |
Title: Re: AMS-ADE multiple sdf command files Post by Kamal on Sep 22nd, 2011, 6:18am I finally copied the 3 sdf command files in one sdf command file, each separated by a ";" and it works :). Kamal |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |