The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Modeling >> Behavioral Models >> CMOS Image Sensor modeling https://designers-guide.org/forum/YaBB.pl?num=1324891674 Message started by Nimrod Ben-Ari on Dec 26th, 2011, 1:27am |
Title: CMOS Image Sensor modeling Post by Nimrod Ben-Ari on Dec 26th, 2011, 1:27am Hi, I'm doing Image Sensor design and I need to model for a 4T Active Pixel CMOS Image Sensor. I have I-V curves for the source follower but I'm not sure how to use them for the model. What I need is, prefreably VerilogA, behavioral model example and an explanation on how to use the information I have. Thanks, * |
Title: Re: CMOS Image Sensor modeling Post by AndyBetts on Feb 14th, 2012, 1:34pm I do consulting work with Asygn and this company has an analog system-level simulation tool specifically for pixel arrays: http://www.asygn.com/SoftAnalogArrays.php 'Hope that this is of help. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |