The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> Circuit Simulators >> Help me with the trans/dc options.
https://designers-guide.org/forum/YaBB.pl?num=1327409320

Message started by muffassir on Jan 24^th, 2012, 4:48am

Title: Help me with the trans/dc options.
Post by muffassir on Jan 24^th, 2012, 4:48am

Hi all,

Can anybody help me with the options in Trans/DC/XF/etc form fields such that i can get the same results/waveform characteristics with Cadence ADE L as that for the HSPICE code given in the attachment?Details are in the attached pdf.

I am using Cadence IC 6.1.4 and ADE L,Virtuoso.What i am face problem is to fill the appropriate options in trans analysis.I have been able to set the Initial condition by Simulations>Convergence aids>Initial Condition 0V to the vg nodes of the NMOS and PMOS..

Note: Please read the highlighted text lines in the pdf from page 23 onwards and HSPICE code,figures etc.