The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> AMS Simulators >> ams simulation: how to use this file which includes all views of the cells https://designers-guide.org/forum/YaBB.pl?num=1327598197 Message started by xuedashun on Jan 26th, 2012, 9:16am |
Title: ams simulation: how to use this file which includes all views of the cells Post by xuedashun on Jan 26th, 2012, 9:16am I have a digital block which uses many logic gates. All of the gates are in one of my libraries, but there are only symbol views and no verilog views there. The verilog views of all of the logic gates are in one file. I don't know how to import the views to individual cells. Is it possible to just use this single file for the gates to run the ams simulation? Thank you! |
Title: Re: ams simulation: how to use this file which includes all views of the cells Post by topquark on Feb 13th, 2012, 5:24am Hi there, I assume you're using Virtuoso? In which case, there's a good Cadence tutorial (not available in public domain, search it on cadence support website) on how to set up config views for AMS sims. If I'm right, what you're looking for is something like shown in the attached pic. Open your adexl test editor: Go to Simulation> Options > AMS Simulator ---------- In that window: Include paths - should point to the directory which has all your verilog views Similarly, specify lib files (foundry libs) --------------- Let me know how you got on? |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |