The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> Leakage power measurement in SRAM using cadence tool https://designers-guide.org/forum/YaBB.pl?num=1334230983 Message started by Ravikumar on Apr 12th, 2012, 4:43am |
Title: Leakage power measurement in SRAM using cadence tool Post by Ravikumar on Apr 12th, 2012, 4:43am Hi, I am doing project on SRAM. Please can anyone tell me how to measure the leakage power of SRAM cell when it is idle or standby mode. |
Title: Re: Leakage power measurement in SRAM using cadence tool Post by Geoffrey_Coram on Apr 13th, 2012, 11:51am Can't you just measure the supply current in standby and multiply by the supply voltage? |
Title: Re: Leakage power measurement in SRAM using cadence tool Post by Ravikumar on Apr 16th, 2012, 10:23pm Thank you for your guidelines. I am using cadence virtuoso tool for our SRAM project. Could you tell the what exact method we have to follow for static power and total average power measurement. Either we have to use calculator or result-browser in cadence tool for these power measurements? Please suggest regarding this with need full. |
Title: Re: Leakage power measurement in SRAM using cadence tool Post by Geoffrey_Coram on Apr 17th, 2012, 4:50am I've never measured SRAM power. Generally, in this forum, you post what you've tried, and we help you find what you did wrong; we don't give you a step-by-step solution to do all the work for you. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |