The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> RF Simulators >> Simulating Frequency Response for Differential Ring Oscillator https://designers-guide.org/forum/YaBB.pl?num=1336416116 Message started by ic_engr on May 7th, 2012, 11:41am |
Title: Simulating Frequency Response for Differential Ring Oscillator Post by ic_engr on May 7th, 2012, 11:41am I would like to know how we can simulate the Freq Response of a ring oscillator which is differential. Where would I break the loop to get Open loop Gain since its differential input/output ? ic_engr |
Title: Re: Simulating Frequency Response for Differential Ring Oscillator Post by sheldon on May 7th, 2012, 6:25pm IC_Engr, Not sure what you are trying to do. Do you just want the open loop frequency response, do you want to know the closed frequency response, or do you want to analyze stability? The answer changes depending on your answer. Best Regards, Sheldon |
Title: Re: Simulating Frequency Response for Differential Ring Oscillator Post by ic_engr on May 8th, 2012, 7:58am Sheldon, I would like to do both Open Loop and Closed Loop Freq Response. Any suggestions ? Abdullah |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |