The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> AMS Simulators >> What is your choice of simulator for MS system of all-corners? https://designers-guide.org/forum/YaBB.pl?num=1339502867 Message started by nieh on Jun 12th, 2012, 5:07am |
Title: What is your choice of simulator for MS system of all-corners? Post by nieh on Jun 12th, 2012, 5:07am Hi guys; I'm currently simulating a mixed-signal system design by AMS, with analog part drawed in cadence composer and digital in verilog; When it comes to all-corner simulation, AMS is too time and license costly, so I attempt other simulator such as Finesim plus nc-verilog; My question is what is your choice of simulator for MS system of all-corners concerning speed and accuracy (pll included)? Is my combine a good alternative? And is there any method to auto-gen spice-format netlist of mixed-signal system based on cadence environment as manually handle the netlist is very trivial and apt to mistake? Cheers & BR nieh |
Title: Re: What is your choice of simulator for MS system of all-corners? Post by nieh on Jun 13th, 2012, 4:24am Any comments are highly appreciated~ BR~ nieh |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |