The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Measurements >> RF Measurements >> wafer probing with die on PCB https://designers-guide.org/forum/YaBB.pl?num=1341454886 Message started by aaron_do on Jul 4th, 2012, 7:21pm |
Title: wafer probing with die on PCB Post by aaron_do on Jul 4th, 2012, 7:21pm Hi all, I have a design where the input port needs to be probed directly on the wafer, while the output should be from an SMA port on the PCB. Is it possible to probe a die which is already soldered onto a PCB? My main concern is whether the plane of the die will be horizontal enough for proper probing. If you have any experience with this please share. thanks, Aaron |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |