The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> PSS and pac analysis on comparator with internal hysteresis https://designers-guide.org/forum/YaBB.pl?num=1362033317 Message started by avlsi on Feb 27th, 2013, 10:35pm |
Title: PSS and pac analysis on comparator with internal hysteresis Post by avlsi on Feb 27th, 2013, 10:35pm I need to simulate a GAIN of a comparator which has internal hysteresis. when i run PSS and PAC analysis, i am getting an error. Simulator: Spice3 Error: Floating point exeception. How can i solve this error? |
Title: Re: PSS and pac analysis on comparator with internal hysteresis Post by Geoffrey_Coram on Mar 1st, 2013, 8:07am The Spice3 I know doesn't support PSS nor PAC. Are you really using Spice3? Are you using a shooting method for PSS? Can you try fixed-point iterations? Can you have it do a long initial transient? Do you have problems with transient? If you run a really long transient, does it look like it's converging to a periodic steady-state? |
Title: Re: PSS and pac analysis on comparator with internal hysteresis Post by avlsi on Mar 5th, 2013, 4:38am Thanks for the reply. I could fix the problem as one of the input in the analysis window should be only a numerical value. After the PSS and PAC successful run, how should i plot Gain versus time. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |