The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> Why SPECTRE and HSPICE BG Ckt result different? https://designers-guide.org/forum/YaBB.pl?num=1383592601 Message started by david47 on Nov 4th, 2013, 11:16am |
Title: Why SPECTRE and HSPICE BG Ckt result different? Post by david47 on Nov 4th, 2013, 11:16am I used the foundry provided models (BSIM3 and BJT) but result from the two simulators are different by about 110mV on a bandgap (Brokaw cell). Temp SPECTRE HSPICE -40C 1.087V 1.197V The BG over temp curve looks different as well. Models were checked by the foundry modeling group. The foundry golden simulator is SPECTRE. So the HSPICE model is derivative of SPECTRE. But I tend to believe HSPICE because it is closer to 1.205V at low temp. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |