The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design >> Analog Design >> mismatch for linear region mosfet https://designers-guide.org/forum/YaBB.pl?num=1385641369 Message started by yvkrishna on Nov 28th, 2013, 4:22am |
Title: mismatch for linear region mosfet Post by yvkrishna on Nov 28th, 2013, 4:22am Hi, Is there any reference for mismatch modeling of mos in linear region. I would expect it to still scale with area. but any simple thumb rules/expression while working with switches. ex: case like pll charge pump where we have replica switches to bypass the currents. Thanks, yvkrishna |
Title: Re: mismatch for linear region mosfet Post by dave_dave on Nov 28th, 2013, 5:14am hi yvkrishna take a look here. slide 13 and 14 will probably help (pelgrom's law) greets dave |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |