The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design Languages >> Verilog-AMS >> array of nodes https://designers-guide.org/forum/YaBB.pl?num=1389683322 Message started by aaron_do on Jan 13th, 2014, 11:08pm |
Title: array of nodes Post by aaron_do on Jan 13th, 2014, 11:08pm Hi all, I want to create a circuit model with a large number of ports (say 1000). In the Verilog-A manual, it says I can create Vectored Nodes, but I can't get this feature to work. The error I get is: line 7: Encountered a vector node with a scalar member in a port list, which the software does not support so are vectored nodes supported or not? thanks, Aaron |
Title: Re: array of nodes Post by Andrew Beckett on Jan 14th, 2014, 6:26am Can you please show what you've actually tried? Also which simulator you're using? Regards, Andrew. |
Title: Re: array of nodes Post by aaron_do on Jan 14th, 2014, 7:19pm OK sorry, but it seems it was a false alarm. this is what I originally tried Quote:
which I got from this document called "SIMetrix Verilog-A Manual" pg 31. I also tried module whatever(out[3:0]); but I got a similar error message. Anyway after you asked for my code I assumed that it is possible to declare a large number of ports, and I found the correct method in the Verilog-A Language Reference Manual Version 1.0., pg 114. I thought I tried this yesterday too but I guess I didn't... Quote:
thanks, Aaron |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |