The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design >> RF Design >> Serpentine stripline trace https://designers-guide.org/forum/YaBB.pl?num=1406798055 Message started by Ritesh on Jul 31st, 2014, 2:14am |
Title: Serpentine stripline trace Post by Ritesh on Jul 31st, 2014, 2:14am Hello Geeks, I have aTDR measurement system and I want to make a serpentine trace to match the impedance of the air filled coax which is around 54 ohms. Iam new to RF design and frankly speaking I dont know how to make that trace,so that the impedance is matched with the coax.Freq used is nearly 7Ghz. Please help me to design its my master thesis work.I have jst 2 months left to complete. :( :( Thanks & Regards, Ritesh Pattnaik. |
Title: Re: Serpentine stripline trace Post by loose-electron on Aug 1st, 2014, 5:39pm Time to go do some research. You're in school to learn, not sponge the knowledge of others on search engines and web forums. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |