The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Other CAD Tools >> Physical Verification, Extraction and Analysis >> EM Simulation https://designers-guide.org/forum/YaBB.pl?num=1408625668 Message started by AZADBAKHT on Aug 21st, 2014, 5:54am |
Title: EM Simulation Post by AZADBAKHT on Aug 21st, 2014, 5:54am Hi All i need to EM Simulation software for analyze inductor for OSC in CMOS-90nm technology. really i need to free download. i downloaded the sonnet software but this software has been cmos-180nm Tech.!! can anyone help me and give me a address for download EM simulation?l |
Title: Re: EM Simulation Post by aaron_do on Aug 21st, 2014, 8:23am Hi, as far as the characteristics of the inductor are concerned, the important part is knowing the conductor thickness and material and how high above the substrate it is. I don't think the other details will have too much effect. regards, Aaron |
Title: Re: EM Simulation Post by AZADBAKHT on Aug 21st, 2014, 11:03pm Hi ok so can i use the sonnet software with gpdk180nm? but i need to knowing the three characteristic cited of you. Regards Mostafa |
Title: Re: EM Simulation Post by irisaru on Sep 17th, 2014, 6:33am Hi, I think you can find these characteristic inside PDK documents, it usually shows how high the substrate, the metal thickness, resistance sheet,... Thanks, Irisaru |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |