The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design Languages >> Verilog-AMS >> Help with Jiles Atherton Model https://designers-guide.org/forum/YaBB.pl?num=1428309610 Message started by edge44 on Apr 6th, 2015, 1:40am |
Title: Help with Jiles Atherton Model Post by edge44 on Apr 6th, 2015, 1:40am Hi, I found an article by Mark C Williams on Simulation and Modelling of Non Linear Magnetics. There is a code written in Verilog on the Jiles Atherton Model, but I want a simple code to be able to produce a hysteresis curve through MATLAB. Is there a way in which the code be redesigned? I tried but there are certain symbols or syntax that I am not familiar with. I have attached the paper for the same. Thanks |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |