The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> Circuit Simulators >> Verilog-AMS Error in Virtuoso
https://designers-guide.org/forum/YaBB.pl?num=1429113804

Message started by Dshoter on Apr 15^th, 2015, 9:03am

Title: Verilog-AMS Error in Virtuoso
Post by Dshoter on Apr 15^th, 2015, 9:03am

Hi. I'm trying to simulate an ideal MOSFET in verilog-ams. After the code been written, save it under a verilog-ams cell viewn in Virtuoso, and them the symbol is automatically created. As soon as I instantiate the symbol in my Test Bench, when I try to run spectre (with verilog ams already defined) I get the following error: "input.scs" 43: I14 is an instance of an undefined model MOSFET
Any one has any idea how to solve it?

With best regards.

Title: Re: Verilog-AMS Error in Virtuoso
Post by boe on Apr 24^th, 2015, 7:49am

Dshoter,
Verilog-AMS is not a legal input for Spectre simulations.
- B O E

Title: Re: Verilog-AMS Error in Virtuoso
Post by Geoffrey_Coram on Apr 30^th, 2015, 5:39am

Verilog-A is legal, and I wonder if your model is actually analog-only, in which case you should be able to save it as view-type veriloga.