The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Modeling >> Behavioral Models >> dynamic Pulse Train https://designers-guide.org/forum/YaBB.pl?num=1435198945 Message started by Joe Shmoe on Jun 24th, 2015, 7:22pm |
Title: dynamic Pulse Train Post by Joe Shmoe on Jun 24th, 2015, 7:22pm Hi, I searching for a possibility to apply a dynamic pulse train. For example: Vread_Vset_Vread_Vset_.... (Vset increases incrementally) if a specific current is detected during Vread then I would like to apply another pulse train: Vread_Vreset_Vread_Vreset_....(Vreset increases incrementally) What is the best way to implement such a model card? Thanks, Joe |
Title: Re: dynamic Pulse Train Post by sheldon on Jun 25th, 2015, 10:51pm Why don't you try doing this with Verilog A? It is good for one off test equipment like this. Sheldon |
Title: Re: dynamic Pulse Train Post by Joe Shmoe on Jun 26th, 2015, 9:15am Hi Sheldon, thanks your reply! Since my subcircuit is written in Verilog-A this is a good option. Now, how would I do that? Could you give me a hint how to start? Thanks, Joe |
Title: Re: dynamic Pulse Train Post by sheldon on Jun 26th, 2015, 5:25pm Voltages are pretty straightforward. How about creating a branch and monitoring the current in the branch? |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |