The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Measurements >> Other Measurements >> WaveView width measurement of a pulse https://designers-guide.org/forum/YaBB.pl?num=1447777955 Message started by rioni on Nov 17th, 2015, 8:32am |
Title: WaveView width measurement of a pulse Post by rioni on Nov 17th, 2015, 8:32am Hello, I am using WaveView to measure the output width of a pulse. My problem is that when I use the measurement tool and choose the Meter Y Level to be locked at 50% , the result width is not in the 50 % of Y Level (I attached a printscreen of it). My question is should I uncheck the 50% option and move the Meter by hand in the middle of the height of the pulse? Thank you. |
Title: Re: WaveView width measurement of a pulse Post by rioni on Nov 17th, 2015, 8:36am To make it clearer , what I suggest to do by hand is the printscreen bellow . |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |