The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> Viewing device currents of transistor nodes https://designers-guide.org/forum/YaBB.pl?num=1451925914 Message started by ksnf3000 on Jan 4th, 2016, 8:45am |
Title: Viewing device currents of transistor nodes Post by ksnf3000 on Jan 4th, 2016, 8:45am Hi All, I have an eldo simulation going on. However I am unable to view the current flowing through the drain of one of my PMOS transistors. The hierarchy is as follows: .plot tran I(xX14.xX14.xMP2.d) is what I am looking for where MP2 is my PMOS transistor and I am looking at the drain current. For this I added a 0V source vddMP2 net6 vddMP2 dc 0 and then did the plot command but it still does not show me anything. Do I need to add this voltage source somewhere? Or please let me know an easy way to view device currents of individual transistors. Thanks, \ksnf3000 |
Title: Re: Viewing device currents of transistor nodes Post by Geoffrey_Coram on Jan 5th, 2016, 11:39am Was "net6" the original connection for MP2's drain, and "vddMP2" is the a new node you created between MP2 and the voltage source? Is the voltage source inside the subcircuit? I assume you have changed the plot command to ask for the source's current, something like .plot tran I(xX14.xX14.vddMP2) But I'm not well-versed in Eldo. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |