The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> Circuit Simulators >> Pin annotation
https://designers-guide.org/forum/YaBB.pl?num=1457611315

Message started by robotist on Mar 10^th, 2016, 4:01am

Title: Pin annotation
Post by robotist on Mar 10^th, 2016, 4:01am

Hello. My name is Kim.
If I have instance named I0 and I want to save current #1 pin(pin name is GND).
So I use ADE-Outputs-To Be Saved-Select On Schematic.
But there is only save I0:1 not I0:GND in netlist.

Surely using cdsTerm(), I can spectre simulation. But I want simulation other tool with only spectre netlist.

Is there any way to save pin name(I0:GND) instead of pin number(I0:1) in netlist?

Title: Re: Pin annotation
Post by ULPAnalog on Mar 10^th, 2016, 10:29am

Hello

I am unable to follow what exactly you wanted from your post. Could you post a schematic to get a better idea.

Thanks and regards