The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> Simulating pierce crystal oscillator (HELP!) T_T https://designers-guide.org/forum/YaBB.pl?num=1461218422 Message started by Gingerxxx on Apr 20th, 2016, 10:59pm |
Title: Simulating pierce crystal oscillator (HELP!) T_T Post by Gingerxxx on Apr 20th, 2016, 10:59pm Im simulating a pierce crystal oscillator on synopsys software. The design that i've made is to achieve 10MHz frequency. The problem is the circuit that ive made doesnt oscillate. Initial condition also been included before the inverter. Is there any error that I've made in this circuit? Thank you RF = 1M Ohm R1 = 1k Ohm C0 = 6p F Cstray = 5p F C1 = C2 = 22p F Pmos W/L = 6u/1u Nmos W/L = 3u/1u |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |