The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design >> Analog Design >> waveform with uneven time period https://designers-guide.org/forum/YaBB.pl?num=1462388192 Message started by Debdut on May 4th, 2016, 11:56am |
Title: waveform with uneven time period Post by Debdut on May 4th, 2016, 11:56am I have a multiphase frequency divider that divides frequency by (67+1/6), (67+2/6),.... There are six equispaced phases at its input. The output is periodic but there are some picosecond order error in the consecutive time periods, i.e. the periods are like T+Δt1, T-Δt2, etc. However the ouput is exactly periodic with period of 6T. Is there a way to remove the picosecond errors by adding an external circuit so that the period comes down to original T. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |