|
The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> Error while Importing S parameters from HFSS into NPORT in cadence-virtuoso https://designers-guide.org/forum/YaBB.pl?num=1473780662 Message started by Shalom.123 on Sep 13th, 2016, 8:31am |
|
Title: Error while Importing S parameters from HFSS into NPORT in cadence-virtuoso Post by Shalom.123 on Sep 13th, 2016, 8:31am Hi, I'm importing s parameters from HFSS into NPORT in cadence-virtuoso. While simulating, showing error like following. ERROR (SFE-691) "input.scs" 61 : Illegal parameter name specified. Simulation terminated prematurely due to fatal error. please help me to resolve the error. thanks. |
|
Title: Re: Error while Importing S parameters from HFSS into NPORT in cadence-virtuoso Post by Geoffrey_Coram on Sep 13th, 2016, 10:01am What's on line 61 of input.scs? (You really haven't given us much to work on.) |
|
Title: Re: Error while Importing S parameters from HFSS into NPORT in cadence-virtuoso Post by Shalom.123 on Sep 13th, 2016, 10:21am please go through this...... CPU Type: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz Processor PhysicalID CoreID Frequency 0 0 0 3000.0 1 0 1 3000.0 Simulating `input.scs' on localhost.localdomain at 4:25:09 AM, Wed Sep 14, 2016 (process id: 6024). Environment variable: SPECTRE_DEFAULTS= +savestate Command line: \ /software/CadTools/cadence/MMSIMIC615/tools.lnx86/spectre/bin/64bit/spectre \ input.scs +escchars +log ../psf/spectre.out -format psfxl -raw \ ../psf +lqtimeout 900 -maxw 5 -maxn 5 Loading /software/CadTools/cadence/MMSIMIC615/tools.lnx86/cmi/lib/64bit/5.0/libinfineon_sh.so ... Loading /software/CadTools/cadence/MMSIMIC615/tools.lnx86/cmi/lib/64bit/5.0/libphilips_sh.so ... Loading /software/CadTools/cadence/MMSIMIC615/tools.lnx86/cmi/lib/64bit/5.0/libsparam_sh.so ... Loading /software/CadTools/cadence/MMSIMIC615/tools.lnx86/cmi/lib/64bit/5.0/libstmodels_sh.so ... Warning from spectre in `rnhr_rf', during circuit read-in. WARNING (SFE-2296): "/designPackages/design_installer/UMC/UMC180/UPDATED/Designkits/Cadence_IC6/UMC_18_CMOS/../Models/Spectre/./rnhr_rf_v2d4.mdl.scs" 8: The inline subckt definition `rnhr_rf' does not contain any inline components. The `inline' qualifier will therefore be ignored. Warning from spectre in `rnnpo_rf', during circuit read-in. WARNING (SFE-2296): "/designPackages/design_installer/UMC/UMC180/UPDATED/Designkits/Cadence_IC6/UMC_18_CMOS/../Models/Spectre/./rnnpo_rf_v2d4.mdl.scs" 8: The inline subckt definition `rnnpo_rf' does not contain any inline components. The `inline' qualifier will therefore be ignored. Warning from spectre in `rnppo_rf', during circuit read-in. WARNING (SFE-2296): "/designPackages/design_installer/UMC/UMC180/UPDATED/Designkits/Cadence_IC6/UMC_18_CMOS/../Models/Spectre/./rnppo_rf_v2d4.mdl.scs" 8: The inline subckt definition `rnppo_rf' does not contain any inline components. The `inline' qualifier will therefore be ignored. Error found by spectre during circuit read-in. ERROR (SFE-691): "input.scs" 61: Illegal parameter name specified. Time for NDB Parsing: CPU = 112.982 ms, elapsed = 236.045 ms. Time accumulated: CPU = 112.982 ms, elapsed = 236.045 ms. Peak resident memory used = 36 Mbytes. Time for parsing: CPU = 0 s, elapsed = 14.0667 us. Time accumulated: CPU = 112.982 ms, elapsed = 236.326 ms. Peak resident memory used = 36 Mbytes. Aggregate audit (4:25:09 AM, Wed Sep 14, 2016): Time used: CPU = 117 ms, elapsed = 240 ms, util. = 48.7%. Time spent in licensing: elapsed = 134 ms, percentage of total = 56%. Peak memory used = 36 Mbytes. Simulation started at: 4:25:09 AM, Wed Sep 14, 2016, ended at: 4:25:09 AM, Wed Sep 14, 2016, with elapsed time (wall clock): 240 ms. spectre completes with 1 error, 3 warnings, and 0 notices. spectre terminated prematurely due to fatal error. |
|
Title: Re: Error while Importing S parameters from HFSS into NPORT in cadence-virtuoso Post by Geoffrey_Coram on Sep 14th, 2016, 1:02pm Quote:
Please answer my question: what's on line 61 of input.scs? |
|
Title: Re: Error while Importing S parameters from HFSS into NPORT in cadence-virtuoso Post by Shalom.123 on Sep 15th, 2016, 2:54am Found the error in 61th line of input.scs Thanks Geoffrey_Coram |
|
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |