The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> AMS Simulators >> Issue with runams generating netlist https://designers-guide.org/forum/YaBB.pl?num=1497047494 Message started by AMS_ei on Jun 9th, 2017, 3:31pm |
Title: Issue with runams generating netlist Post by AMS_ei on Jun 9th, 2017, 3:31pm Hi, I am trying to generate netlist using "runams" script. The netlist is generated successfully but some of the instances have ports binding by order ( not by name). I am using the following command to generate a netlist: runams -lib <lib_name> -cell <cell_name> -view config -netlist -rundir top_run Is there any other option that I am missing here to generate the netlist in which all the instances will have port binding by name ( not by order)? Thank you. Kind regards. |
Title: Re: Issue with runams generating netlist Post by AMS_ei on Jun 18th, 2017, 12:03am Hi, When I use ADE-L and generate the netlist usign irun, the generated netlist has port binding by name, which is correct. Is there any other option to pass through runams that I can generate the same netlist which I have generated using ADE-L using irun? Also, during this netlist generation, I am looking for .amsbind.scs file. Can anyone please help me out here. Thank you. Kind regards. |
Title: Re: Issue with runams generating netlist Post by Andrew Beckett on Jul 25th, 2017, 9:14am I wouldn't expect the naming to be different. One reason might be that you have something in your .simrc which is affecting the defaults? You can pass -state to give it the ADE state. The .amsbind.scs should be present in the netlist subdirectory underneath the run directory (passed with -rundir) assuming that the netlist assembly succeeded. Regards, Andrew. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |