The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> AMS Simulators >> Support for AMS Simulation " Connect rule are not found in your AMS isntallation https://designers-guide.org/forum/YaBB.pl?num=1526359236 Message started by FDU2012crm on May 14th, 2018, 9:40pm |
Title: Support for AMS Simulation " Connect rule are not found in your AMS isntallation Post by FDU2012crm on May 14th, 2018, 9:40pm Hi, I am trying to study the AMS simulation for mix-signal system. However when i follow the tutorial for amsPLL and try to the AMS simulation in ADL. I try to set the connect rule in setup. " Connect rule are not found in your AMS isntallation" appears. I cannot do any thing. (1) I have installed IUS92 and connectLib are in lib manager (2) AMS_HOME is set to IUS92 install directory. would some like to help me ? Many thanks! :'( |
Title: Re: Support for AMS Simulation " Connect rule are not found in your AMS isntallation Post by Andrew Beckett on May 19th, 2018, 12:48am Before wasting too much time, I wonder why you are using such an ancient version of the simulator? There have been many, many releases since then - there's no reason to be using something so old. Regards, Andrew. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |